Rewinding machine in the paper when cutting paper is not cut off a series of circumstances, do not panic, carefully observe the problem, find the corresponding solution, rewinding paper manufacturers for you to introduce rewinding machine paper cutting operation is not normal solution.
1. Rewinding machine volume two paper together, sheet didn't cut is frequent small fault, if appear this kind of problem, the first thing to check whether the paper cutting knife blade is in good condition, if in good condition, the examination paper cutting knife knife knife is on the bottom, after inspection to move the paper cutting knife to the position of the bottom knife, knife see again, if there is no sticker on knife blade after action, incised paper knife back down the small cover plate, change the knife on the balloon.
2. When the rising process of paper cutter of rewinder is not in place, first check whether the limit of the instrument is normal, then check the gear box of paper cutter, whether the oil level is too low and the rising is not enough, check whether the chain of paper cutter is too long and the rising of both sides is inconsistent, if the chain is too long, remove the next section.
3. When the paper cutter of rewinder is mounted with rollers, check whether the cylinders on both sides of the paper cutter work normally in the rising process. If one cylinder does not move, the tool holder will be attached to the roller surface, and the cylinder needs to be replaced; If the cylinder is trouble-free, it is necessary to adjust the tool holder fixed bolts, the adjustment to the rewinding machine below, so that the paper cutter normal operation.
4. When the paper cutter blade of rewinding machine rotates and beats greatly manually, remove the paper cutter head and replace the upper circular cutter shaft