Slitting and rewinding machine is an important equipment in the paper processing industry, paper manufacturers almost every day to use this equipment, if there is a fault will hinder the production process, manufacturers will have a loss. Generally speaking, if the usual staff do not pay attention to the daily maintenance, slitting rewinder will often appear some difficult problems, in order to solve these small problems from time to time, we summarized the following points more often encountered problems for your reference, hope to help you:
First, the cutting rewinding machine is not neat. Most of this situation is due to the paper core is not applicable, as long as the replacement of the paper core in line with the requirements of the inner diameter, in addition to the use of the winding roller in the winding process, can also avoid the cutting machine winding.
Second, the cutting volume of material starting trend. This is mainly the winding tension is not correct, adjust the paper cutting machine suitable winding tension, winding using pressure roll and cut the material package after the pressure roll into the winding paper core.
Third, meter counting is inaccurate. This kind of problem can be meter wheel two wheels at the same time in contact with the feed cots, and on the meter wheel do a mark hand 5 turns to count 1 meter or replace meter.
These are rewinding paper manufacturers in the operation of cutting rewinding machine often encountered problems, in order to quickly solve to keep in mind these points, there may be other new problems, you can consult these paper machinery manufacturers, let the professional technical personnel to help solve.